Road marking systems and glass beads from highways to parking lots: Dual, Thermo, Mono and Reflect series
Profiled road marking paint with a high-viscosity cold-plastic structure that creates a textured, audible warning effect and drains water in rainy weather.
Lane marking paint applied by spraying, mixed at a 1:1 ratio, forming smooth surfaces thanks to its high flowability.
Colored coating paint optimized for manual roller application, sag-free on vertical surfaces, ideal for bicycle lanes and pedestrian areas.
An aesthetic and functional floor coating with vivid, UV-resistant colors, developed for special projects, bus stops and pedestrian crossings.
High-performance thermoplastic paint applied by extrusion, resistant to heavy-vehicle traffic, reaching 2–3 mm thickness.
Low-viscosity alkyd-resin thermoplastic paint optimized for thin-film application, ideal for renewing existing lines.
Arrows, symbols and traffic markings made of heat-applied thermoplastic that can be installed quickly on site.
Economical thermoplastic solution specially formulated for road-edge and curb applications, melting at low temperature.
The most widely used classic road marking paint, based on chlorinated rubber resin, with high hiding power and fast drying.
Eco-friendly, low-VOC water-based acrylic road paint suitable for airports and indoor areas.
Economical, low-cost alkyd-resin traffic paint, ideal for curbs and temporary markings.
Special paint that dries within 5–10 minutes, designed for urgent repair and maintenance work in heavy-traffic areas.
Easy-to-apply floor paint for parking areas with high abrasion and chemical resistance.
Fine glass beads mixed in during paint production, providing homogeneous distribution and retroreflectivity throughout the life of the paint.
Coarse glass beads sprinkled onto the surface immediately after paint application, providing high retroreflectivity.
Special beads with anti-skid properties that create a textured surface, improving safety on curves and sloped roads.
Hard-coated industrial glass beads with high abrasion and chemical resistance for factory and warehouse floors.
Special sealing primer that improves paint adhesion on old or porous surfaces.
Solvents formulated for each paint type, used to adjust paint viscosity and to clean equipment.
BPO-based chemical catalyst that cures two-component paints.
